nf-54 fta series(40,50,60a) three phase input type(1-stage filter) fta -50 -683 - o ordering information 1 model name 2 rated current 3 line to ground capacitor code:see table 1.1. table1.1 line to ground capacitor code code leakage current (input 250/500v 60hz) (335only 250/400v 60hz) line to ground capacitor (nominal value) 223 1.0ma/2.0ma max 22,000pf 683 2.5ma/5.0ma max 68,000pf 104 3.5ma/7.0ma max 100,000pf 335 160ma/250ma max 3.3 f * when the line to ground capacitor code is different, the attenuation characteristic is different. 4 option h:ultra high-attenuation type "335" is not applied. g:with switch of line to ground capacitor only "335" is applied. * leakage current 160ma/250ma max when the switch state is on (switched to ? ?). 10 a/16a max when the switch state is off (switched to ? ?). 1 2 3 4 features of fta series circuit diagram derating curve book type (space-saving type) - 1-stage filter general-purpose high-attenuation (150khz - 1mhz) - selectable leakage current value, ultra high attenuation type "335" for eu (wye type with neutral earth system), with switch of line to ground capacitor "-g" specifications no. items FTA-40-683 fta-50-683 fta-60-683 1 rated voltage[v] ac three phase 500 ( voltage range:528 max) * 1 2 rated current[a] 40 50 60 3 test voltage (terminal-mounting plate) 2,500 vac (cutoff current = 100ma), 1minute at room temperature and humidity * 2 4 isolation resistance (terminal-mounting plate) 500 vdc 100m w min at room temperature and humidity * 3 5 leakage current 250/500v 60hz 2.5ma/5.0ma max 6 dc registance 8.5m w max 6m w max 4.5m w max 7 safety agency approval temperatures -25 to +85 c (refer to derating curve) 8 operating temperature -40 to +85 c (refer to derating curve) 9 operating humidity 20 to 95%rh (non condensing) 10 storage temperature/humidity -40 to +85 c /20 to 95%rh (non condensing) 11 vibration 10 to 55hz, 19.6m/s 2 (2g), 3min. period, 1hour each x, y and z axis 12 impact 196.1m/s 2 (20g), 11ms once each x, y and z axis 13 safety agency approvals ul1283, csa c22.2 no.8 (c-ul) , din en60939 vde0565 teil3-1, enec 14 case size (without projection) 65 x 84 x 153 mm (w x h x d) (option: -g refer to external view) [2.56 x 3.31 x 6.02 inches] (w x h x d) 15 weight 1.2kg max * 1 only ?fta- o o -335? and ?fta- o o -335-g?,three phase d -connection:400 (440 max),y-connection:500 (528 max) * 2 only ?fta- o o -335? and ?fta- o o -335-g?, 2,800vdc (cutoff current = 10ma), 1minute at room temperature and humidity. * 3 only ?fta- o o -335? and ?fta- o o -335-g?, insulation resistance speci? cation is deleted. case line 1 2 3 load 4 5 6 cy cy : mounting plate cy : line to ground capacitor case line 1 2 3 load 4 5 6 cy : mounting plate cy : line to ground capacitor 70 80 90 -20 40 50 60 20 0 -40 -30 100 80 60 40 ambient temperature [ c ] load factor [%] (1) line to ground capacitor code : 223, 683, 104 (2) line to ground capacitor code : 335 (3) fta- o o -335-g case line 1 2 3 load 4 5 6 cy sw : mounting plate cy : line to ground capacitor sw : switch (the switch state is off) http://www..net/ datasheet pdf - http://www..net/
nf-55 fta series (40,50,60a) external view ? tolerance : 1 [ 0.04] ? weight : 1.2kg max ? mounting plate : iron (surface finishing : nickel plating) t=1.2 [0.05] ? case : pbt ? dimensions in mm, [ ]=inches ? terminal block screw tightening torque m5 : 3.0n - m (30.7kgf - cm)max ? protection earth (pe) screw tightening torque m4 :1.6n - m (16.9kgf - cm)max ? can not be mounted upside-down (mounted the top surface) [3.31] [0.45] [0.22 x 0.28] [0.22] [2.56] [0.68] [2.17] [0.53] [2.83] [5.51] protection earth [5.20] [6.02] m4 m4 terminal cover 3-m5 mounting hole f 5.5 x 7 mounting plate output terminal protection earth 3-m5 input terminal mounting hole f 5.5 name plate 84 11.5 65 17.25 13.5 55 0.5 72 140 0.5 153 132 standard type with switch of line to ground capacitor on/off ? tolerance : 1 [ 0.04] ? weight : 1.2kg max ? mounting plate : iron (surface finishing : nickel plating) t=1.2 [0.05] ? case : pbt ? dimensions in mm, [ ]=inches ? terminal block screw tightening torque m5 : 3.0n - m (30.7kgf - cm)max ? protection earth (pe) screw tightening torque m4 :1.6n - m (16.9kgf - cm)max ? can not be mounted upside-down (mounted the top surface) [0.18] 3-m5 m4 m4 [0.45] [3.31] [2.83] terminal cover [2.17] [0.53] output terminal [0.22 x 0.28] mounting hole [5.51] protection earth name plate [2.56] [0.68] 3-m5 input terminal protection earth [5.20] [6.02] mounting plate [0.22] mounting hole f 5.5 with switch of line to ground capacitor f 5.5 x 7 ? the switch state is off at shipping ? switch status on : " ", off : " " ? 11.5 17.25 4.5 +1.5 - 0.5 84 72 55 0.5 65 13.5 153 140 0.5 132 high leakage current first connect to earth http://www..net/ datasheet pdf - http://www..net/
|
